Getting a clean brick fireplace not only assures the prevention by fire issues, simply is as well identical esthetically pleasing to the room. Whenever you see your fireplace could apply few cleaning, these 3 light ways will tidy it up in no time.

Apply a Wire Brush and Hot Water

Whenever your fireplace brick hasn’t turned black with soot, than you can probably get off with cleaning the surface with a wire brush and a few hot water.  Just sink the brush in a bucket of hot water and start scrubbing.  You will want to pick up a softer wire brush so as not to scratch the surface of the brick.

Use Homemade Cleaning Solutions

A mixture of hot water, borax acid, and pumice powder will work wonders on the toughest soot stains.  After mixing the ingredients in a bucket, spread the mixture on the brick and let it dry for about ten minutes.  Then wipe the brick down with a rag and clean water.

Use Chlorine Bleach

A chlorine solution with hot water will tackle the toughest mold and mildew stains in your fireplace. Since bleach has some hazardous chemicals, make sure to wear rubber gloves for safety when cleaning and scrubbing.